Commercial Heater Repair in Petaluma, CA

Commercial systems are complex. They need specialized tools and equipment. We bring:

• combustion analyzers

• gas leak detectors

• manometers

• digital multimeters

• airflow meters

• thermometers and sensors

• brush cleaning kits

• shop vacuums

• replacement igniters

• flame sensors

• blower motors

• control boards

• gas valves and limit switches

Most repairs can be completed in one visit because we carry what we need.

No confusing terms or guesswork

Here is the thing. Many commercial HVAC companies talk in technical circles. That does not help you. You want simple answers. So we explain everything clearly and give you all the facts before the repair begins.

You will know:

• what is wrong

• what caused it

• what it will take to fix it

• how long the repair will last

• what the cost is

No pressure. No scare tactics. Just honest information.

Fast service when heating is critical

Some facilities cannot wait. Medical offices, restaurants, warehouses, and production facilities often need quick response. That is why we offer same day or next day commercial appointments when heating problems affect your operations.

Warranty backed work

Whenever possible, we offer warranty backed parts and labor. If an issue comes up later that is connected to the repair, we help resolve it.

What We Repair?

Stouts Heating and Air Conditioning handles a full range of commercial heating problems.

Commercial furnace repair

We repair both gas and electric commercial furnaces. This includes burners, ignition systems, blower motors, limit switches, control boards, and safety sensors.

Heat pump repair in heating mode

Heat pumps can struggle in colder temperatures, especially in areas like Sonoma Mountain. We fix refrigerant issues, reversing valves, and airflow problems to restore proper heating.

Rooftop heating system repair

Rooftop units face wind, rain, sun, and temperature swings. These systems often fail due to electrical issues, blower motor wear, ignition problems, or dirty components. We repair all rooftop heating equipment.

Packaged unit heating repair

Many office buildings and retail stores rely on packaged units for both heating and cooling. If your packaged system is blowing cold air, cycling too often, or not turning on at all, we can diagnose and repair the issue.

Burner and ignition repair

If your heating system clicks repeatedly or will not ignite, the ignition system may be failing. We repair igniters, flame sensors, burners, and ignition controls.

Blower motor repair

Weak airflow or temperature imbalance in your building often means the blower motor is worn out or the belt is failing. We repair or replace the motor, belts, and bearings.

Thermostat and control system repair

Commercial thermostats and control systems can lose calibration or stop responding. We repair wiring, thermostat sensors, and control boards.

Gas valve and safety sensor repair

If a safety sensor or gas valve fails, the entire heating system shuts down to prevent hazards. We replace faulty components and ensure the system operates safely.

Carbon monoxide testing

We use digital tools to check carbon monoxide levels and inspect potential sources of leaks. If anything is unsafe, we shut the system down and guide you through corrective options.

Ductwork inspection and airflow balancing

Uneven temperatures across your building often come from airflow issues. We inspect ducts, check airflow pressure, repair small leaks, and perform balancing.

Emergency commercial heater repair

If your building is freezing and your staff cannot work comfortably, call us. We have rapid response appointments available.

Common Heating Problems in Petaluma Commercial Buildings

Here are problems we see often in areas like the Industrial Park, North McDowell District, Downtown Petaluma, the Lakeville Highway corridor, and East Washington Street.

Cold air blowing from vents

Often caused by ignition issues, gas valve problems, or heat pump mode failure.

Weak airflow

Usually tied to blower motor issues, dirty filters, or duct obstructions.

System will not turn on

A failed safety switch, control board issue, or electrical fault could be the cause.

Strange sounds like grinding or rattling

This often means a blower wheel or motor bearing is failing.

Hot and cold spots in different rooms

Airflow issues or duct balancing problems are common reasons for this.

Short cycling

When the heater turns on and off too fast, it wastes energy and wears out parts. Overheating, airflow blockages, and sensor issues are usually to blame.

Higher energy bills than normal

If the system is struggling, it uses more fuel or electricity. Dirty burners, bad motors, or malfunctioning sensors could be the cause.

Our Process for Commercial Heater Repair

We keep things simple and predictable so you can stay focused on your business.

Step 1. You call us or schedule online
We gather details about your heating problem and your building.

Step 2. A technician arrives with commercial tools and parts
We come prepared to diagnose and fix the problem.

Step 3. Full heating system diagnostics
We inspect ignition systems, airflow, electrical parts, gas lines, sensors, burners, thermostats, and heat exchangers.

Step 4. Clear explanation of the issue
We break everything down in simple terms so you know exactly what is happening.

Step 5. Written repair estimate
You approve the work before anything begins.

Step 6. Repairs and safety testing
We complete the repairs, check safety systems, test airflow, and confirm the building is heating properly.

Step 7. Follow up if needed
We make sure the repair holds and your building stays warm.

Real Examples From Local Petaluma Businesses

Industrial Park warehouse

The furnace would not ignite. We repaired the flame sensor and cleaned the burner assembly.

Office building on North McDowell

Employees complained about cold rooms. We found a failing blower motor and replaced it.

Retail store near the Premium Outlets

Heating system was cycling too often. A dirty filter and overheating limit switch were the cause.

Restaurant near Downtown Petaluma

System was blowing lukewarm air. We recalibrated the thermostat and replaced a weak igniter.

Keep Your Petaluma Business Warm and Safe

If your commercial heating system is failing or has already stopped working, Stouts Heating and Air Conditioning is ready to help. We serve all of Petaluma including:
Historic Downtown, Petaluma Industrial Park, North McDowell District, East Petaluma, West Petaluma, Petaluma Riverfront, and the Lakeville Highway corridor.

We diagnose the issue, explain your options, and repair the system with safety and performance in mind.

Call us today to schedule commercial heater repair in Petaluma CA.

Get Free Estimate